MBR1000 help

petersunseri · EVDO Newbie Joined: 05 Feb 2008 Posts: 8

Hey i got this router a few months ago when it came out, and I'm using a UM150 Alltel device to give me the internet. The firmware just came out for it and I was hoping that would solve my problem, which was the router would not reconnect, after it had been disconnected, therefore I would have to restart the router for it to connect again.. Anyways so i downloaded this file for the firmware.. What do i do with it? Sorry for being completely Non tech savvy but any help would be great, thanks.

Jim_in_VA · Posted: Wed Apr 16, 2008 6:32 pm Post subject:

Go into the router configuration and select the setting to upgrade the firmware, browse to where you downloaded the file, select it, and let the router download and install it.
_________________
evdo-tips.com

petersunseri · EVDO Newbie Joined: 05 Feb 2008 Posts: 8

ok sounds good, how do i get into the router configuration?

Jim_in_VA · Posted: Wed Apr 16, 2008 6:47 pm Post subject:

open a web browser and type in the router's IP. I think for a Cradlepoint it is 192.168.0.1 but check your instruction sheet to be sure
_________________
evdo-tips.com

petersunseri · EVDO Newbie Joined: 05 Feb 2008 Posts: 8

well hey, I did that and everything, and I tried to log into the router afterwards and was getting an incorrect password error, what would be the default password on it so i can go in and change it.

Michael · Posted: Wed Apr 16, 2008 8:07 pm Post subject:

Peter,

The default password is the last 6 digits of your Mac Address (label on bottom of MBR1000). If you look on the CD that we provided, there is a MBR1000 Tip sheet that makes doing these things a bit easier.
_________________
EVDO :: EVDO News :: EVDO Antennas :: Buy Verizon :: Buy Sprint :: EVDO Amplifier