Unable to connect to CTR350

carsc99 · Posted: Sat Feb 09, 2008 9:24 am Post subject: Unable to connect to CTR350

When I open a browser window and type http://192.168.0.1 nothing ever comes up. I am using the WAN port, which connects to a Linksys WRT54G, which connects the computer via a network cable. I have had this set up for sometime and have never had any problems. However, my problem seemed to come up after I disabled the wireless function of the WRT54G. I have since re-enabled the wireless function but I still cannot connect to the CTR350. Any suggestions?

Scott

Alex · Posted: Sat Feb 09, 2008 9:41 am Post subject:

reboot the ctr, and take the linksys out of the setup (for testing)
connect directly to the ctr and see if that allows admin access.
if you fail to do it via ethernet, try wirelessly (direct to ctr)

carsc99 · Posted: Sat Feb 09, 2008 11:03 am Post subject:

Thanks Alex, your always helpful. I went through your trouble shooting.
I got it to work. So, I went back and changed the WTR54G wireless setting to off again, and now it is working. The CTR had been rebooted a half dozen times before. Who knows...Now, it's all good.

Scott

Alex · Posted: Sat Feb 09, 2008 11:33 am Post subject:

glad its working for you.

fyi, if you are trying to use the linksys as your WAP, the new 2.0.0 firmware for the ctr350 allows you to turn off its wireless radio, so it won't conflict with the linksys.