Sanyo MM-9000 and linux. Modem.

hondaman · EVDO Newbie Joined: 22 Jun 2006 Posts: 1

Im trying to get my mm-9000 to work as a modem under linux (FC5) Ive looked at several how-tos, but none of them are working. Here is some info.

When I plug the phone in, this is /var/log/messages

Jun 22 21:39:52 hondalap1 kernel: ohci_hcd 0000:00:03.1: wakeup
Jun 22 21:39:52 hondalap1 kernel: usb 2-1: new full speed USB device using ohci_hcd and address 5
Jun 22 21:39:52 hondalap1 kernel: usb 2-1: configuration #1 chosen from 1 choice

cat /proc/bus/usb/devices shows

T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 4 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0474 ProdID=071f Rev= 0.00
S: Manufacturer=SANYO Electric
S: Product=SANYO USB Phone
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=128ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=84(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms

Any help or pointers to get me started would sure be appreciated!