Speed cap on PHS300?

inimical · EVDO Newbie Joined: 15 Sep 2009 Posts: 6

When using my 4G Motorola USB from Clear, I get about 8Mbps when connected directly to my laptop.

But when I plug the same card into my Clear PHS300 I only get 2.6Mbps constantly.

Is there some sort of speed limiter on this device? Or is there a setting I can change to get the correct speed out of my modem?

berdinkerdickle · EVDO Newbie Joined: 12 Oct 2009 Posts: 3

im_electronic · Posted: Mon Oct 12, 2009 8:30 pm Post subject:

I googled and didn't find any speed tests, try the methods refrenced in the attached articles oyu cna set the ehternet port to WAN and connect a wireless client and see what speeds you get, this will show the max throughput of the chipset in the PHS, relate that to you 4G speeds and your all set.

dario · Posted: Tue Oct 13, 2009 9:20 am Post subject:

Try this,

Disable Traffic Shaping, Disable SPI, and if you have a small usb extension cable try placing it between the modem and the router.

berdinkerdickle · EVDO Newbie Joined: 12 Oct 2009 Posts: 3

Here is a similar thread:

http://www.evdoforums.com/thread12560.html

inimical · EVDO Newbie Joined: 15 Sep 2009 Posts: 6

Any updates on this?

I've tried the suggestions in this thread but haven't had any luck in breaking the 2.5Mbps "barrier"

This thing isn't much better than a 3g Mifi if I can't get up over 2.5Mbps

berdinkerdickle · EVDO Newbie Joined: 12 Oct 2009 Posts: 3

Still maxing out at 2Mbps 2.5 here.

There's been discussion over at http://www.howardforums.com/forumdisplay.php?f=471 for Wimax Speeds.

Maybe I'll start a Thread over there and see if we get any feedback.