Forcing KR2 to 1x :?:

snfexpress · EVDO Newbie Joined: 28 Oct 2008 Posts: 2

We are currently in an area where we are just on the fringe of EV. I think the router is having problems trying to keep the EV connection and would like to force it to the slower speed.

evdoscottc · Posted: Wed Oct 29, 2008 11:38 am Post subject:

What EVDO device are you using with the KR2?

Your best bet is adding an external antenna to get a stronger signal.

snfexpress · EVDO Newbie Joined: 28 Oct 2008 Posts: 2

We are using a Verzon USB 720 with an external Wilson Trucker antenna. Also, I upgraded the firmware on the KR2 to version 3 (reluctant to go to version 4 after reading some of the posts).

On our Verizon phones I can see the flipping back and forth. What seems to be happening with the data card is that when loading a web page, it will hang for quite a while, then load all at once. Standard ping rates seem to good, in the 250ms range and less than 1% are dropped.

Thank you for your help,

Michael