| View previous topic :: View next topic |
| Author |
Message |
peterv95
EVDO Fledgling
Joined: 15 Jun 2007
Posts: 18
|
 Posted: Sun Aug 26, 2007 4:46 pm Post subject: |
 |
|
wiz,
uploaded the new version and works very well with sprint/pantech px500 card.
but when I try the alltel UTstarcom 5750 I get error :
"Device usb_tts_0 is locked by pid 4190"
pid hat some other numbers, like 3270, 3880 ..
thanks for your great work.  |
|
| Back to top |
|
 |
Nighthawke70
EVDO Heavy User
Joined: 16 Aug 2007
Posts: 104
|
| Posted: Sun Aug 26, 2007 4:50 pm Post subject: |
|
|
Sprint, PX-500, and the card runs like a sewing machine on my laptop. Either with the connection manager or without.
I've had connect times over a day and a half, with little issue, one bar or none showing.
I'll set back up the router and get a delog for you here sometime. |
|
| Back to top |
|
|
Nighthawke70
EVDO Heavy User
Joined: 16 Aug 2007
Posts: 104
|
| Posted: Sun Aug 26, 2007 5:06 pm Post subject: |
|
|
Here is the initial bootup to first connection log. It's a little bulky.
When it craps itself, I hope to get a snapshot of the log.
18:00:33 pppd[851]: sent [LCP ConfReq id=0x5 <asyncmap 0x0> <magic 0x509958dd>]
18:00:33 pppd[851]: sent [IPCP ConfReq id=0x2 <addr 70.3.1.150> <ms-dns1 68.28.178.11> <ms-dns3 68.28.186.11>]
18:00:33 pppd[851]: sent [IPCP ConfReq id=0x1 <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
18:00:33 pppd[851]: sent [IPCP ConfAck id=0x0 <addr 68.28.177.69>]
18:00:33 pppd[851]: secondary DNS address 68.28.186.11
18:00:33 pppd[851]: remote IP address 68.28.177.69
18:00:33 pppd[851]: rcvd [LCP DiscReq id=0x2 magic=0x13fc6145]
18:00:33 pppd[851]: rcvd [LCP ConfNak id=0x4 <pcomp> <accomp>]
18:00:33 pppd[851]: rcvd [LCP ConfAck id=0x5 <asyncmap 0x0> <magic 0x509958dd>]
18:00:33 pppd[851]: rcvd [IPCP ConfReq id=0x0 <addr 68.28.177.69>]
18:00:33 pppd[851]: rcvd [IPCP ConfNak id=0x1 <addr 70.3.1.150> <ms-dns1 68.28.178.11> <ms-dns3 68.28.186.11>]
18:00:33 pppd[851]: rcvd [IPCP ConfAck id=0x2 <addr 70.3.1.150> <ms-dns1 68.28.178.11> <ms-dns3 68.28.186.11>]
18:00:33 pppd[851]: primary DNS address 68.28.178.11
18:00:33 pppd[851]: local IP address 70.3.1.150
18:00:33 pppd[851]: Script /etc/ppp/ip-up started (pid 867)
18:00:33 pppd[851]: Script /etc/ppp/ip-up finished (pid 867), status = 0x1
18:00:32 pppd[851]: sent [LCP ConfReq id=0x4 <asyncmap 0x0> <magic 0x509958dd>]
18:00:32 pppd[851]: sent [LCP ConfReq id=0x3 <asyncmap 0x0> <magic 0x509958dd>]
18:00:32 pppd[851]: sent [LCP ConfReq id=0x2 <asyncmap 0x0> <magic 0x509958dd>]
18:00:32 pppd[851]: sent [LCP ConfReq id=0x1 <mru 1492> <asyncmap 0x0> <magic 0x509958dd>]
18:00:32 pppd[851]: sent [LCP ConfRej id=0x0 <pcomp> <accomp>]
18:00:32 pppd[851]: sent [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0x13fc6145>]
18:00:32 pppd[851]: rcvd [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x13fc6145>]
18:00:32 pppd[851]: rcvd [LCP ConfReq id=0x0 <asyncmap 0x0> <magic 0x13fc6145> <pcomp> <accomp>]
18:00:32 pppd[851]: rcvd [LCP ConfRej id=0x1 <mru 1492>]
18:00:32 pppd[851]: rcvd [LCP ConfNak id=0x3 <pcomp> <accomp>]
18:00:32 pppd[851]: rcvd [LCP ConfNak id=0x2 <pcomp> <accomp>]
18:00:29 pppd[851]: using channel 1
18:00:29 pppd[851]: Using interface ppp0
18:00:29 pppd[851]: Serial connection established.
18:00:29 pppd[851]: Connect: ppp0 <--> /dev/usb/tts/0
18:00:29 chat[853]: ^M
18:00:29 chat[853]: CONNECT
18:00:29 chat[853]: -- got it
18:00:28 chat[853]: timeout set to 20 seconds
18:00:28 chat[853]: send (AT^M)
18:00:28 chat[853]: send (ATZ^M)
18:00:28 chat[853]: send (ATE0V1^M)
18:00:28 chat[853]: send (ATD#777^M)
18:00:28 chat[853]: expect (OK)
18:00:28 chat[853]: expect (OK)
18:00:28 chat[853]: expect (OK)
18:00:28 chat[853]: expect (CONNECT)
18:00:28 chat[853]: abort on (NO DIALTONE)
18:00:28 chat[853]: abort on (NO CARRIER)
18:00:28 chat[853]: abort on (NO ANSWER)
18:00:28 chat[853]: abort on (ERROR)
18:00:28 chat[853]: abort on (BUSY)
18:00:28 chat[853]: ^M
18:00:28 chat[853]: ^M
18:00:28 chat[853]: ^M
18:00:28 chat[853]: ^M
18:00:28 chat[853]: OK
18:00:28 chat[853]: OK
18:00:28 chat[853]: OK
18:00:28 chat[853]: ATZ^M^M
18:00:28 chat[853]: ATE0V1^M^M
18:00:28 chat[853]: -- got it
18:00:28 chat[853]: -- got it
18:00:28 chat[853]: -- got it
18:00:27 pppd[851]: pppd 2.4.3 started by root, uid 0 |
|
| Back to top |
|
|
evdo-wizard
EVDO Heavy User
Joined: 21 Apr 2007
Posts: 125
|
| Posted: Sun Aug 26, 2007 6:01 pm Post subject: |
|
|
Nighthawke70,
looks like you didn't catch the problem in that log.
| Quote: |
uploaded the new version and works very well with sprint/pantech px500 card.
but when I try the alltel UTstarcom 5750 I get error :
"Device usb_tts_0 is locked by pid 4190" |
that is a somewhat general error with pppd.. have you gotten it to connect with the 5750 at all? To my understanding, the PX-500 and 5750 are the same card, with different labeling.
Last edited by evdo-wizard on Sun Aug 26, 2007 6:05 pm; edited 1 time in total |
|
| Back to top |
|
|
Nighthawke70
EVDO Heavy User
Joined: 16 Aug 2007
Posts: 104
|
| Posted: Sun Aug 26, 2007 6:05 pm Post subject: |
|
|
IT disconnected and refused to connect for me until I did a warm boot.
18:59:32 pppd[21600]: pppd 2.4.3 started by root, uid 0
18:59:32 pppd[21600]: Exit.
18:59:32 pppd[21600]: Device usb_tts_0 is locked by pid 851
18:59:28 pppd[21497]: pppd 2.4.3 started by root, uid 0
18:59:28 pppd[21497]: Exit.
18:59:28 pppd[21497]: Device usb_tts_0 is locked by pid 851
18:59:22 pppd[851]: Connection terminated.
18:59:19 pppd[851]: sent [LCP TermReq id=0x7 "User request"]
18:59:17 pppd[851]: Terminating on signal 15
18:59:17 pppd[851]: Script /etc/ppp/ip-down finished (pid 21322), status = 0x1
18:59:16 pppd[851]: sent [LCP TermReq id=0x6 "User request"]
18:59:16 pppd[851]: Terminating on signal 15
18:59:16 pppd[851]: Sent 8615943 bytes, received 35797882 bytes.
18:59:16 pppd[851]: Script /etc/ppp/ip-down started (pid 21322)
18:59:16 pppd[851]: Connect time 58.8 minutes.
18:00:33 pppd[851]: sent [LCP ConfReq id=0x5 <asyncmap 0x0> <magic 0x509958dd>]
18:00:33 pppd[851]: sent [IPCP ConfReq id=0x2 <addr 70.3.1.150> <ms-dns1 68.28.178.11> <ms-dns3 68.28.186.11>]
18:00:33 pppd[851]: sent [IPCP ConfReq id=0x1 <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
18:00:33 pppd[851]: sent [IPCP ConfAck id=0x0 <addr 68.28.177.69>]
18:00:33 pppd[851]: secondary DNS address 68.28.186.11
18:00:33 pppd[851]: remote IP address 68.28.177.69
18:00:33 pppd[851]: rcvd [LCP DiscReq id=0x2 magic=0x13fc6145]
18:00:33 pppd[851]: rcvd [LCP ConfNak id=0x4 <pcomp> <accomp>]
18:00:33 pppd[851]: rcvd [LCP ConfAck id=0x5 <asyncmap 0x0> <magic 0x509958dd>]
18:00:33 pppd[851]: rcvd [IPCP ConfReq id=0x0 <addr 68.28.177.69>]
18:00:33 pppd[851]: rcvd [IPCP ConfNak id=0x1 <addr 70.3.1.150> <ms-dns1 68.28.178.11> <ms-dns3 68.28.186.11>]
18:00:33 pppd[851]: rcvd [IPCP ConfAck id=0x2 <addr 70.3.1.150> <ms-dns1 68.28.178.11> <ms-dns3 68.28.186.11>]
18:00:33 pppd[851]: primary DNS address 68.28.178.11
18:00:33 pppd[851]: local IP address 70.3.1.150
18:00:33 pppd[851]: Script /etc/ppp/ip-up started (pid 867)
18:00:33 pppd[851]: Script /etc/ppp/ip-up finished (pid 867), status = 0x1
18:00:32 pppd[851]: sent [LCP ConfReq id=0x4 <asyncmap 0x0> <magic 0x509958dd>]
18:00:32 pppd[851]: sent [LCP ConfReq id=0x3 <asyncmap 0x0> <magic 0x509958dd>]
18:00:32 pppd[851]: sent [LCP ConfReq id=0x2 <asyncmap 0x0> <magic 0x509958dd>]
18:00:32 pppd[851]: sent [LCP ConfReq id=0x1 <mru 1492> <asyncmap 0x0> <magic 0x509958dd>]
18:00:32 pppd[851]: sent [LCP ConfRej id=0x0 <pcomp> <accomp>]
18:00:32 pppd[851]: sent [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0x13fc6145>]
18:00:32 pppd[851]: rcvd [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x13fc6145>]
18:00:32 pppd[851]: rcvd [LCP ConfReq id=0x0 <asyncmap 0x0> <magic 0x13fc6145> <pcomp> <accomp>]
18:00:32 pppd[851]: rcvd [LCP ConfRej id=0x1 <mru 1492>]
18:00:32 pppd[851]: rcvd [LCP ConfNak id=0x3 <pcomp> <accomp>]
18:00:32 pppd[851]: rcvd [LCP ConfNak id=0x2 <pcomp> <accomp>] |
|
| Back to top |
|
|
peterv95
EVDO Fledgling
Joined: 15 Jun 2007
Posts: 18
|
| Posted: Sun Aug 26, 2007 6:28 pm Post subject: |
|
|
| evdo-wizard wrote: |
that is a somewhat general error with pppd.. have you gotten it to connect with the 5750 at all? To my understanding, the PX-500 and 5750 are the same card, with different labeling. |
same card with different sticker 
this is the log :
7:52:55 pppd[3570]: Exit.
17:52:54 pppd[3570]: Connect script failed
17:52:54 chat[3590]: alarm
17:52:54 chat[3590]: Failed
17:52:51 chat[3590]: } } } }#}%B#}%}%}&5\k}0}'}"}(}"}8Z~~^?}#@!}!}&} }9}"}&} } } } }#}%B#}%}%}&5\k}0}'
17:52:48 chat[3590]: }1})~~^?}#@!}!}$} }9}"}&} } } } }#}%B#}%}%}&5\k}0}'}"}(}"\}!~~^?}#@!}!}%} }9}"}&}
17:52:42 chat[3590]: }#}%B#}%}%}&5\k}0}'}"}(}"UR~~^?}#@!}!}#} }9}"}&} } } } }#}%B#}%}%}&5\k}0}'}"}(}"
17:52:39 chat[3590]: ~^?}#@!}!}!} }9}"}&} } } } }#}%B#}%}%}&5\k}0}'}"}(}"}9?~~^?}#@!}!}"} }9}"}&} } } }
17:52:34 chat[3590]: timeout set to 20 seconds
17:52:34 chat[3590]: send (ATZ^M)
17:52:34 chat[3590]: expect (OK)
17:52:34 chat[3590]: abort on (NO DIALTONE)
17:52:34 chat[3590]: abort on (NO CARRIER)
17:52:34 chat[3590]: abort on (NO ANSWER)
17:52:34 chat[3590]: abort on (ERROR)
17:52:34 chat[3590]: abort on (BUSY)
17:52:33 pppd[3570]: pppd 2.4.3 started by root, uid 0
card connects fine in laptop. Maybe it has to do with the one alltel tower closest to me. That tower is currently set up and tested with EVDO. When I put my card on HDR only, I get very strong signals. But I 'can't connect with laptop .. wrong username/password or server does not answer. |
|
| Back to top |
|
|
joshuamcdo
EVDO User
Joined: 07 Jul 2007
Posts: 26
|
| Posted: Sun Aug 26, 2007 7:00 pm Post subject: I had simalar problems with heavily pokies firmware. |
|
|
I had to write the script that I posted on pokies thread, that kills the following..
killall -9 pppd
rm /tmp/run/pppo.pid
killall -9 dnsmasq
cardctl eject 0
Then in the call back function I would call the following in the following order.
cardctl insert 0
/etc/init.d/S60dnsmasq
/etc/init.d/S80ppp
Below is my log file of re-dials, not reboots.
1 - Wed, 22 Aug 2007 16:18:24 -0500
1 - Thu, 23 Aug 2007 00:03:11 -0500
1 - Thu, 23 Aug 2007 06:54:59 -0500
1 - Thu, 23 Aug 2007 20:02:51 -0500
1 - Thu, 23 Aug 2007 21:56:14 -0500
1 - Fri, 24 Aug 2007 11:58:56 -0500
1 - Fri, 24 Aug 2007 14:07:36 -0500
1 - Fri, 24 Aug 2007 15:19:23 -0500
1 - Fri, 24 Aug 2007 19:43:43 -0500
1 - Sat, 25 Aug 2007 09:02:19 -0500
1 - Sat, 25 Aug 2007 09:15:26 -0500
1 - Sat, 25 Aug 2007 16:13:14 -0500
1 - Sat, 25 Aug 2007 18:25:17 -0500
1 - Sat, 25 Aug 2007 18:42:28 -0500
1 - Sun, 26 Aug 2007 00:35:22 -0500
1 - Sun, 26 Aug 2007 03:48:34 -0500
1 - Sun, 26 Aug 2007 19:37:43 -0500
Hope that helps someone..
Joshua
Last edited by joshuamcdo on Sun Aug 26, 2007 7:46 pm; edited 1 time in total |
|
| Back to top |
|
|
Mephis
EVDO User
Joined: 04 Feb 2007
Posts: 79
|
| Posted: Sun Aug 26, 2007 7:38 pm Post subject: |
|
|
EXCELLENT WORK on the new release! (1.1)
URL=http://www.speedtest.net] [/URL]
I'm outside of sprint's wireless map as well!
_________________
Merlin S720 |
|
| Back to top |
|
|
evdo-wizard
EVDO Heavy User
Joined: 21 Apr 2007
Posts: 125
|
| Posted: Sun Aug 26, 2007 10:03 pm Post subject: |
|
|
@joshuamcdo
you shouldn't use killall -9.. but I know that you do to make sure that it quits and the lock file is removed. Using killall -9 doesn't give pppd a chance to clean up (and I see that you have your script manually remove ppp0.pid).
my solution to that was
| Code: | killall pppd
while [ -e /var/lock/LCK..* ]; do
sleep 1
done |
that way it kills pppd and waits until the lock file is removed to move on.
also, rm /tmp/run/pppo.pid should be rm /tmp/run/ppp0.pid
@Mephis
thanks. I'm still working on this a lot, and its been updated quite a bit from v1.1 already. There will be even another version soon. |
|
| Back to top |
|
|
kkc0123
EVDO Newbie
Joined: 29 May 2007
Posts: 3
Location: Utah
|
| Posted: Mon Aug 27, 2007 3:03 pm Post subject: |
|
|
| Does this firmware support router Access Restrictions? On Linksys version Access Restrictions do not work correctly and tech support acknowledges that "Engineers have verified the problem". They just don't seem to want to do anything about it, as it has been several months now. |
|
| Back to top |
|
|
DonL
EVDO User
Joined: 13 Apr 2007
Posts: 33
Location: Southeast US
|
| Posted: Mon Aug 27, 2007 6:07 pm Post subject: |
|
|
Does anyone know what patch Linksys Engineers applied to fix the Upload Speed. I am running the Linksys firmware and V1.1 Openwrt side by side and I get 26% improved upload and 11% improved download in the Openwrt compared to Beta Linksys firmware. Both break the 250K barrier that use to exist.
Could it just be the size?? Or perhaps the tool-chain optimized?
I have ran these tests by staggering upload/download tests on 2 linksys routers (side by side) using my wife s720 and my s720. I averaged the data over 3 days now..... I get an average of 680 upload on Openwrt compared to 503 on Linksys Beta and 1.48Mb vs 1.25Mb download. Wierd....
Guess that there could be some advantage in performance to White Russian and OpenWrt although I have had 'No issues with Beta hangups' and a few with OpenWrt. I think it primarily has to do with keep-alive although I am not quite sure yet. |
|
| Back to top |
|
|
Michael
Site Admin
Joined: 13 Jan 2005
Posts: 5052
Location: Cary, IL
|
| Posted: Mon Aug 27, 2007 6:22 pm Post subject: |
|
|
Thanks evdo-wizard!
We have all the Verizon cards and AT&T cards for testing and we can test them and report back. Can you provide a list of cards you suspect should work, we can test.
Thanks!
_________________
EVDO :: EVDO News :: EVDO Antennas :: Buy Verizon :: Buy Sprint :: EVDO Amplifier |
|
| Back to top |
|
|
evdo-wizard
EVDO Heavy User
Joined: 21 Apr 2007
Posts: 125
|
| Posted: Mon Aug 27, 2007 7:51 pm Post subject: |
|
|
there should be support for all of these cards:
Sierra Wireless AirCard 875
Audiovox PC5740
Pantech PX-500 and PC5750
Sierra Wireless Aircard 595
Novatel Wireless S720
Sierra Wireless Aircard 580
Kyocera Wireless KPC650
Novatel Wireless V620
AirPrime 5220
Option GT MAX 3.6
Sierra Wireless AC875
Yes, thats a huge list. Thanks and good luck  . |
|
| Back to top |
|
|
laserone
EVDO User
Joined: 15 Aug 2007
Posts: 29
|
| Posted: Mon Aug 27, 2007 10:41 pm Post subject: |
|
|
| I've had absolutely no luck getting the PC5750 to connect on Alltel running the OpenWRT firmware. With the latest Linksys firmware, I connect no problem. Anyone else having problems? |
|
| Back to top |
|
|
kinggodzilla
EVDO Fledgling
Joined: 14 Jul 2005
Posts: 20
|
| Posted: Tue Aug 28, 2007 5:48 am Post subject: Lock ups |
|
|
I've been using the firmware since you released it. I've had some trouble with the latest release.
I use a Sprint px-500. The router seems to lock-up for no reason. It won't establish new wireless connections, allow Internet traffic, nor assign out DHCP. I can't even get the admin page to load passed the login.
I have noticed it seems to be after a long period of no activity, like when I wake up in the morning or when I come home from work.
I unplug and plug in the router again and it starts working fine.
Think it might have been a bad flash? Flash again? |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
